Board index Simulación Aérea DCS: World AvioDev: C-101

AvioDev: C-101


Post Fri Jun 24, 2016 8:34 pm
Silver_Dragon User avatar
Expert Member
Expert Member

Posts: 578
Location: Arafo, Tenerife, Canary Islands
Del Facebook de Aviodev, cabinas del C-101EB y CC recontruidas desde cero y radios en implementación.

https://www.facebook.com/Aviodev/?fref=nf
FOUR TIMES!
===========
The complete C-101EB/CC structure has been redone, as again we were not happy with the previous results, and for two seaters functionality was mandatory task.
Also lot of work on radios development. That means do it four times, C-101EB and C-101CC front and rear cockpit, but definetely the gate for multicrew is open. We have succesfully implemented radios dependency in front/rear cockpit in both C-101 You can take the radio priority in any of both cockpits and tune the frecuency, with all the functionality. It takes time but we are happy to get motivational results.
Step by step until achieve the target!
---------------------------------
La estructura completa C-101EB / CC se ha hecho de nuevo, ya que de nuevo no estábamos contentos con los resultados previos, y para la funcionalidad de la multicabina era tarea obligatoria.
También mucho trabajo detrás en el desarrollo de las radios. Eso significa hacer el trabajo cuatro veces, C-101EB y C-101CC cabina anterior y posterior, pero definitivamente la puerta para la multicabina compartida está abierta. Hemos implementado con éxito la dependencia de radios en la cabina anterior/posterior en el C-101. Ahora es posible tomar la prioridad de la radio en cualquiera de las dos cabinas y sintonizar la frecuencia, con toda la funcionalidad. Nos ha costado tiempo, pero estamos contentos de ver resultados motivadores.
Paso a paso hasta conseguir el objetivo!


Image
More news to the front

Post Thu Aug 04, 2016 8:11 pm
Silver_Dragon User avatar
Expert Member
Expert Member

Posts: 578
Location: Arafo, Tenerife, Canary Islands
Segun Aviodev el codigo de Radio e intercom es funcional en la cabina delantera y trasera del C-101EB, esperan que haya un update pronto. Esperan poner un post con mas información al respecto y sacar un video mostrando su funcionamiento.

http://forums.eagle.ru/showpost.php?p=2 ... tcount=172
Hi,

I know, communication is not our best asset, and it's something we have been trying to improve, and we will keep trying for sure. Apologies for that.

As our first projects, we were ot free to make mistakes, and bad choies at some points, for example thinking to take two variants of the same version, it would be not so hard to achieve. Then we found those two variants had more diferences than we expect, and also both are two-seaters. That means in terms of code, manage four cockpits, ang brings a massive time invested to implement them in the best way. Just multricrew meant rework and reestructure a big part of the code to make it possible, in talking EB/CC that means do it twice. Add to this, AFM integration with systems and get a proper results.

But when beta was released, we acquire a compromise with the community about the features in the C-101, and we feel we must complete the project with this features even it means lot of extra time invested. It is a very special project for us, and we won't be happy with us if for release something quickly, we have to a lite version of DCS C-101.

This week we implemented Comm UHF and VHF radio + Intercom in front and rear cockpit on EB. It took time to achieve this milestone. We were waiting to make a post with this feature and a video showing how they work now, so there was no news in almost one month as we wanted the whole pack of comms radio ready. This will be available on next update.

I know this post can be understood as excuses, or doesn't help to dissipate some concerns. As some of you could think this looks very bad, but after all this months, and with all the problems, hey we are still alive and ready, as we never had any doubt about this project, and we keep everyday focused and working on the target.

We really want to thank you very much to all these people who still sends their support to us, it really means a lot to us. And for those who has lost their faith on this, we just hope our work and commitment will reverse this.
More news to the front

Post Sat Aug 06, 2016 10:12 am
Silver_Dragon User avatar
Expert Member
Expert Member

Posts: 578
Location: Arafo, Tenerife, Canary Islands
Video de AvioDev mostrando el funcionamiento de la radios en cabina del C-101EB
https://youtu.be/DdbbD9eOjVk

y la misma cabina vista desde el ModelViewer (mas de 800000 poligonos).
https://youtu.be/WMLM83QOsB4
More news to the front

Post Sun Aug 14, 2016 7:15 pm
Silver_Dragon User avatar
Expert Member
Expert Member

Posts: 578
Location: Arafo, Tenerife, Canary Islands
Update de la cabina del C-101CC de Aviodev, desde su Facebook:

https://www.facebook.com/Aviodev/?fref=nf
In the meantime C-101EB rear cockpit is being implemented, we keep improving the module, reworking the magnetic compass and HUD. :)
--------------------
Mientras se implementa la cabina posterior del C-101EB, seguimos mejorando el módulo, mejorando la brújula magnética y el HUD.

Image
More news to the front

Post Sun Aug 28, 2016 10:26 am
Silver_Dragon User avatar
Expert Member
Expert Member

Posts: 578
Location: Arafo, Tenerife, Canary Islands
Siguen los progresos de la cabina trasera de C-101 por Aviodev

http://forums.eagle.ru/showpost.php?p=2 ... tcount=219
Step by step, we are bringing to life the rear cockpit. Implementing all systems, not just mirroring them from the front cockpit, but doing it in an independent way. This will allow us to generate failures for an instructor/student role in addition to the IFR training hood option.
Some of the modifications made are the compass housing, slip indicator, instrument flags smooth animation, correct altimeter implementation, as well as cockpit clock, electrical system improvements and its corresponding circuit breakers, CC cockpit corrections, like for example the HUD.
And many other corrections have been made, which list would be too long.
--------------------------
Paso a paso vamos dándole vida a la cabina posterior. Implementando todos los sistemas, no sólo replicándolos desde la cabina anterior, sino haciéndolo de forma independiente. Esto nos permitirá generar fallos en el papel de instructor/alumno en conjunto con la opción de la capota para entrenamiento IFR.
Algunas de las modificaciones realizadas son la carcasa de la brújula, el indicador de resbale, animaciones de banderas de instrumentos, correcta implementación del altímetro, así como del reloj, mejoras en el sistema eléctrico y correspondientes cortacircuitos, correcciones en la cabina del CC, como el visor (HUD).
Y muchas otras correcciones cuya relación sería muy extensa.


Image
More news to the front

Post Sun Sep 11, 2016 12:19 pm
Silver_Dragon User avatar
Expert Member
Expert Member

Posts: 578
Location: Arafo, Tenerife, Canary Islands
Update de desarrollo de Aviodev

https://www.facebook.com/Aviodev/?hc_re ... NE&fref=nf
Hi everyone!

This past week we reached some interesting milestones.
- During a trip to Chile, crossing the Atlantic to the far side of the world, we couldn't let pass the chance to jump on a C-101CC in the Museo Nacional Aeronáutico y del Espacio - Santiago de Chile, in order to take videos and pictures from each possible angle. We would like to thank the Director of the museum and Staff for allowing the visit to the aircraft and opening front/rear cockpit for us.
- We are now taking advantage of all aerodynamic data available from C101 in order to keep working on AFM, which will hopefully give good results once they are fully implemented.
- We have been reestructuring all the livery folders to reduce the module size, deleting duplications, reducing our installation from 2Gb to 1.35Gb.
- We keep implementing systems on EB/CC rear cockpit, working on both cockpits integration, fixing some bugs and tuning some systems.
- Texturing work has started in our the new F1 model.
-------------------------------------
¡Hola a todos!

La semana pasada llegamos a algunos hitos interesantes.
- Durante un viaje a Chile, cruzando el Atlántico hasta el otro lado del mundo, no podíamos dejar pasar la oportunidad de saltar sobre un C-101CC en el Museo Nacional Aeronáutico y del Espacio - Santiago de Chile, a fin de tener vídeos e imágenes desde cada ángulo posible. Nos gustaría dar las gracias al director del museo y del personal por permitir la visita a la aeronave y abrirnos la cabina anterior/posterior para nosotros.
- Ahora estamos aprovechando todos los datos aerodinámicos disponibles del C101 con el fin de seguir trabajando en el AFM, que esperemos dé buenos resultados una vez que se implementen completamente.
- Hemos estado reestructurando todas las carpeta de libreas para reducir el tamaño general del módulo, eliminando las duplicidades. Hemos reducido la instalación de 2 GB a 1.35Gb.
- Seguimos con la implementación de sistemas de la cabina trasera en el EB/CC, trabajando en la integración de ambas cabinas, corrigiendo algunos problemas y ajustando algunos sistemas.
- El trabajo de texturizado se ha iniciado en nuestro nuevo modelo de F1.


Image
More news to the front

Post Sat Sep 24, 2016 3:25 pm
Silver_Dragon User avatar
Expert Member
Expert Member

Posts: 578
Location: Arafo, Tenerife, Canary Islands
Actualización de Aviodev sobre el C-101

https://www.facebook.com/Aviodev/
Image
Not a big priority right now (as we have already the 3D model completed and released), but we will update the 3D model of C-101EB/CC, starting from the scratch. The reason? is simple, with all the time we have invested on this project, we want to care about each single detail. So we feel that we can provide a more detailed 3D model and updated to the new standards. In the same way we are revising and rewriting most of the systems in order to provide the module we once dreamed.
-------------------------------------
No es una gran prioridad en este momento (ya que se ha completado el modelo 3D y lanzado), pero vamos a actualizar el modelo 3D del C-101EB /CC, comenzando desde cero. La razón? es simple, con todo el tiempo que hemos invertido en este proyecto, queremos cuidar cada uno de los detalles. Por lo que creemos que podemos proporcionar un modelo 3D más detallado y actualizado a los nuevos estandares. De la misma manera estamos revisando y reescribiendo la mayoría de los sistemas con el fin de proporcionar el módulo que una vez soñamos.
More news to the front

Previous

Return to DCS: World

cron